Flex découpe rouge

How to Use:

1. Create your design

2. Cut with the gloss side facing DOWN and the duller back of the htv vinyl white facing up

3. Peel away the excess vinyl, leaving your design on the carrier sheet

4. Apply the design to your T-shirt with a heat press at 305-320 for 10-15 seconds, if you use a home iron, press it with firm pressure

5. Peel the carrier sheet cold, if areas of design lift after application, do step 4 again

Tips:

Do not use nylon, velvet, acrylic fabrics, leather, vinyl which will melt and ruin the material.

Hand washes your fabric gently with mild detergent. Wait 24 hours after application to wash.

Quickly and easily apply the heat transfer vinyl to fabric using a hot iron or heat press;

We recommend using COTTON, POLYESTER, COTTON/POLYESTER BLENDS, LYCRA fabric for best performance.

It works on normal fabric as well as MESH TYPE fabric.

Just Iron-on, and voila, your own customized DIY project on T-shirts, hats, bags, team or club wear, garments, shoes,

and other textiles, etc!